System Requirements

1. Computer Hardware:

CPU - Pentium 233 MHz
RAM - 32MB
At least 10MB free hard disk space
At least one free Serial Port or Infrared Port or USB Port (with USB to Serial Converter)

Note: For GSM Modems or GSM Phones connected using Infrared port or USB to Serial Converter, select appropriate virtual serial port to communicate with mCore™.

2. GSM Modem With SIM Card

mCore™ has been designed to work with any ETSI GSM 07.05 (Version 7.0.1 Release 1998) compatible GSM modem. Any GSM mobile phone (with suitable serial/USB data cable or Infrared port) that have built in modem and support AT commands can be used with mCore™. Some of the popular GSM modems with which mCore™ has been tested are as follows:

Falcom: Twist, Swift, Samba 55, Samba 75
iTegno: WM1080A, WM1080A1I, WM1080A1E, 3000, 3232E, 3232I, 3898
Multitech: MTCBA-G-UF1, MTCBA-G-UF2
Nokia: N30, N32, 6100, 6210, 6220, 6310, 6310i, 6820(Bluetooth), 8910
Siemens: TC35, TC35i, TC45, TC65, MC35, MC35i, MC45, MC55, MC65, MC75, A65, AC75, AC45, C35, C45, M35, M45, S35
SIMCOM: SIM100S, SIM100T
Sony Ericsson: T310, T610, T630, T68, T68i, K310, K320, K500, K510, K600, K700, K750i, K800i, V800, W300, W550, W600, W700, W800i, W810, W900, Z1010, GC75, GC79, GC83, GC85, GC89
Teltonika: T-ModemUSB, T-ModemCOM
Wavecom: Fastrack M1206B, Fastrack M1306B, Integra, WMOi3

A valid SIM card which has access to SMS service is required with the GSM modem.

Note: Most Nokia phone models do not support AT command set directly. To use mCore™ with Nokia phones you may need to install Nokia Data Suite software or the appropriate modem driver driver (if using Infrared port) and select the virtual serial port for communication between mCore™ and Nokia handset.

3. Software:

Operating System: Windows 98/2000/XP/2003/Vista
Any programming environment that supports ActiveX Components (e.g. Microsoft Visual Basic, VBScript, Active Server Pages, Borland Delphi etc)