Installation

Hardware Setup

Insert the SIM card into the slot provided in the GSM Modem/Phone. (Refer modem or phone manual for detail).
Connect the modem/phone to the serial port of the computer using a suitable serial/USB data cable. If an Infrared port is used, then align the infrared port of the modem/phone to that of the computer. (refer your modem manual and computer hardware manual for more detail on using Infrared port).
Switch ON the modem and check if the Modem/Phone starts up properly and registers in the network. Check by making a call from another phone if the GSM modem/phone is reachable.
You can use the Windows Hyperterminal to check if the computer and the modem are able to communicate with each other properly (Refer Frequently Asked Questions section in this reference manual)
You can also use the mCore™ demo application (mCoreDemo.exe) after completing mCore™ setup on your computer to check the communication between the PC and GSM Modem/Phone.

Note: For GSM Modems or GSM Phones connected using Infrared port or USB to Serial Converter, select appropriate virtual serial port to communicate with mCore™.

Software Setup

Downlaod mCore16.exe from http://www.logixmobile.com
Run mCoreSetup.exe and follow the instructions to install mCore™ SMS ActiveX Component on your computer.
Run mCoreDemo.exe to check if mCore has been installed properly and the computer is communicating with the modem properly.

Note: mCore.dll file can be found in the folder C:\Program Files\Common Files\LogixMobile\

Important: If you have purchased the licensed version of mCore™, you must install mCore using the setup file delivered to you at the time of license purchase. This is to ensure that the license key is compatible with the installed version of mCore™.